I have been trying to build a MotionEyeOS for a while, I would like to run the Raspberry Pi Software for a Raspberry Pi Zero 2W PCB.
I have been having problems trying to get the Raspberry Pi Zero 2W PCB to function because I’m not sure which version of Software I should download from the GitHub.

I’m mainly home bound due to ill health and suffering from a stroke, I’m also 70 years old and do find some projects, difficult to follow.
Hopefully I will be able to follow your new instructions and have success with this project.
Once again a big thank you to both you David, Sara.

Thanks for sharing.
Regards,
Sara

Thank you very much indeed Sara for the information.

Hi.
You can manually change the name of the file after creating it.
You can remove the .txt afterwards.
Regards,
Sara

I’m using the MotionEyeOS on a Raspberry Pi Zero 2 W PCB

In this document, it mentions about a Wpa Supplicant file and using Note Pad, I typed out the following information below, the information tells you the following “Important: when you save the file ensure it is Wpa_supplicant.conf and not Wpa_supplicant.conf.txt as this will not work!
Copy your Wpa_supplicant.conf file to the root of the SD card.”

When I try and save the file in Note Pad, it will only allow me to save as type “Text documents (*.txt) I’m not sure how to change this.

country=UK
update_config=1
ctrl_interface=/var/run/wpa_supplicant

network={
ssid=”extn2″
psk=”your-password”
id_str=”extn2″

That’s great!